Process

  1. Download the ISOs
  2. Get a license from the ‘Request a Demo’ link on the bottom of this page
    Note: This will require your work email
  3. Install on your favorite virtualization platform
  4. Follow the setup wizard
  5. Enjoy the software

Latest GA (version 3.4)

Application Server (1.4G)

sha256sum 0d625e41e09019f8997e53389fba5f5dd1defc9a6faf6c2856b78bace66098eb
sha1sum 7081f07ea1f60565388cbd57c04c201f4c24ccbf

Web Server (1.7G)

sha256sum 15c169aa8b5d29ac4cc6f730cffbceefe82fd110ca84dea4cabb1098c620c949
sha1sum bf1b64fb67c3bd6a242d98a8e86d9c2b2a86074e

Credentials

Web

Default User:

superman

Default Pass:

I leap tall buildings

SSH

Default User:

cn-admin

Default Pass:

something about smiling

** root password provided temporarily when needed and then rotated

Minimum System Requirements

ITEM REQUIREMENT NOTE
CPU 1
Memory 4G
Storage 20G Additional local storage for backup and file transfer may be desired

Network Access Requirements

SOURCE DESTINATION PROTOCOL PORT PURPOSE
User Network Web Server TCP 443 WebUI
User Network Web Server TCP 8443 SSH button (requires trusted wildcard or SAN certificate)
Web Server Application Server TCP 443 API
Web Server Application Server TCP 22 SSH management
Application Server Devices TCP 22 Device Access
Web Server Any TCP 443 License Verification
Server Updates
Baseline Audit Item Updates
Two-factor delivery
52.39.161.96
54.235.233.17
Public IP of Web Server TCP 22 CyberSana Active Management
Local Administrator Private IP of Web Server
Private IP of Application Server
TCP 22 Local SSH access
Web Server Mail Server TCP 25 Mail (the port may differ for your environment)
Web Server NTP Server UDP 123 Network Time Protocol
Application Server NTP Server UDP 123 Network Time Protocol
Web Server DNS Server UDP 53 Domain Name Resolution
Application Server DNS Server UDP 53 Domain Name Resolution

Installation

The software will automatically install for you.  Total time is dependent on your hardware and disk size.  At the end of the installation, you will be prompted for 10 minutes to complete the system setup as seen below.

 

After both servers have been installed and setup, you will be able to access the web server at https://<web-server-IP>.  Enter the default web credentials found above and below.  The system will prompt you through a wizard.

Web

Default User:

superman

Default Pass:

I leap tall buildings

License

A trial license will be sent out to you via email.  It will be good for 90 devices and 90 days.  It will also limit external monitoring to 90 IP addresses.  The license is verified in the cloud.  It will not verify if you have not allowed outbound https from the servers.

If you require a higher number of devices or a longer period of time, please contact [email protected].

Application URL

The first question in the setup wizard refers to a domain name that you may use internally to access the web user interface (WebUI).  Customers general utilize a name associated with a wildcard certificate to establish trust.  Typical example would be *.companyname.com.  If you are simply accessing via an IP, then the application URL is https://<web-server-IP>.  This can be updated at a later time.

SSH Button Access

SSH will require a wildcard or SAN certificate in order to work.  Contact us at [email protected] in order to get this setup.

First Time Setup